0.9mm Zincanneal Sheet 1.2m x 2.4m

High‑quality 0.9 mm Zincanneal mild steel sheet with a smooth, spangle‑free zinc/iron alloy coating that’s engineered for forming and a ready‑to‑paint surface.

Key specifications

• Thickness:0.9 mm.
• Typical sheet size:1.2 x 2.4 m; alternate common size:1220 x 2440 mm; actual supplied sizes may vary by mill and stock availability.
• Surface finish: matte, skin‑passed, spangle‑free zinc/iron alloy coating designed for direct painting and powdercoat.
• Coating type: hot‑dipped zinc/iron alloy (Zincanneal) produced by post‑galvanising heat treatment that alloying the zinc to the iron surface.

What Zincanneal is

Zincanneal is a family of hot‑dipped steel products where the galvanized coating is heat treated to form a zinc/iron alloy layer. The result is a uniform, matte grey, spangle‑free surface with improved paint adhesion and predictable forming behaviour compared with conventional spangled galvanised sheet.

Is Zincanneal good for welding

Yes. Zincanneal is well suited to common fabrication welding processes. Its coating and steel base are selected so the material welds and performs in typical shop welding, brazing and fabrication operations used for electrical cabinets, appliance panels and automotive body repairs.

Is Zincanneal good for painting

Yes. The skin‑passed matte surface of Zincanneal provides excellent direct‑on paint and powdercoat adhesion and a superior painted finish with minimal visible coating defects, making it a popular choice where a high‑quality painted appearance is required.

Typical uses

• Automotive inner panels, repair panels and small bodywork.
• Appliance and equipment panels, electrical cabinets, switchboards and furniture.
• General fabrication where forming, welding and a painted finish are required.

Handling and prep advice

• Clean with a mild degreaser to remove oils and contamination before priming or powdercoating.
• Use recommended primers and paint systems for coated steels to maximise corrosion resistance and finish longevity.
• Confirm final dimensional requirements when ordering; sheets commonly stocked as 1.2 x 2.4 m or 1220 x 2440 mm and can be cut to size by request.

Why choose this sheet

Choose 0.9 mm Zincanneal when you need a ready‑to‑paint, easy‑to‑form and reliable welding substrate that gives a consistent matte finish and predictable fabrication performance.

Sources: .